Struct h2::server::Connection

#[must_use = "streams do nothing unless polled"]
pub struct Connection<T, B: IntoBuf> { /* fields omitted */ }

Accepts inbound HTTP/2.0 streams on a connection.

A Connection is backed by an I/O resource (usually a TCP socket) and implements the HTTP/2.0 server logic for that connection. It is responsible for receiving inbound streams initiated by the client as well as driving the internal state forward.

Connection values are created by calling handshake. Once a Connection value is obtained, the caller must call poll or poll_close in order to drive the internal connection state forward.

See module level documentation for more details

Examples

server::handshake(my_io)
    .and_then(|server| {
        server.for_each(|(request, respond)| {
            // Process the request and send the response back to the client
            // using `respond`.
        })
    })

Methods

impl<T, B> Connection<T, B> where     T: AsyncRead + AsyncWrite,     B: IntoBuf,

pub fn set_target_window_size(&mut self, size: u32)

Sets the target window size for the whole connection.

If size is greater than the current value, then a WINDOW_UPDATE frame will be immediately sent to the remote, increasing the connection level window by size - current_value.

If size is less than the current value, nothing will happen immediately. However, as window capacity is released by ReleaseCapacity instances, no WINDOW_UPDATE frames will be sent out until the number of "in flight" bytes drops below size.

The default value is 65,535.

See ReleaseCapacity documentation for more details.

pub fn poll_close(&mut self) -> Poll<(), Error>

Returns Ready when the underlying connection has closed.

If any new inbound streams are received during a call to poll_close, they will be queued and returned on the next call to poll.

This function will advance the internal connection state, driving progress on all the other handles (e.g. RecvStream and SendStream).

See here for more details.

pub fn abrupt_shutdown(&mut self, reason: Reason)

Sets the connection to a GOAWAY state.

Does not terminate the connection. Must continue being polled to close connection.

After flushing the GOAWAY frame, the connection is closed. Any outstanding streams do not prevent the connection from closing. This should usually be reserved for shutting down when something bad external to h2 has happened, and open streams cannot be properly handled.

For graceful shutdowns, see graceful_shutdown.

pub fn graceful_shutdown(&mut self)

Starts a graceful shutdown process.

Must continue being polled to close connection.

It's possible to receive more requests after calling this method, since they might have been in-flight from the client already. After about 1 RTT, no new requests should be accepted. Once all active streams have completed, the connection is closed.

Trait Implementations

impl<T, B> Debug for Connection<T, B> where     T: Debug,     B: Debug + IntoBuf,     B::Buf: Debug,

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<T, B> Stream for Connection<T, B> where     T: AsyncRead + AsyncWrite,     B: IntoBuf,     B::Buf: 'static,

type Item = (Request<RecvStream>, SendResponse<B>)

The type of item this stream will yield on success.

type Error = Error

The type of error this stream may generate.

fn poll(&mut self) -> Poll<Option<Self::Item>, Error>

Attempt to pull out the next value of this stream, returning None if the stream is finished.

fn wait(self) -> Wait<Self>

Creates an iterator which blocks the current thread until each item of this stream is resolved.

fn into_future(self) -> StreamFuture<Self>

Converts this stream into a Future.

fn map<U, F>(self, f: F) -> Map<Self, F> where     F: FnMut(Self::Item) -> U,

Converts a stream of type T to a stream of type U.

fn map_err<U, F>(self, f: F) -> MapErr<Self, F> where     F: FnMut(Self::Error) -> U,

Converts a stream of error type T to a stream of error type U.

fn filter<F>(self, f: F) -> Filter<Self, F> where     F: FnMut(&Self::Item) -> bool,

Filters the values produced by this stream according to the provided predicate.

fn filter_map<F, B>(self, f: F) -> FilterMap<Self, F> where     F: FnMut(Self::Item) -> Option<B>,

Filters the values produced by this stream while simultaneously mapping them to a different type.

fn then<F, U>(self, f: F) -> Then<Self, F, U> where     F: FnMut(Result<Self::Item, Self::Error>) -> U,     U: IntoFuture,

Chain on a computation for when a value is ready, passing the resulting item to the provided closure f.

fn and_then<F, U>(self, f: F) -> AndThen<Self, F, U> where     F: FnMut(Self::Item) -> U,     U: IntoFuture<Error = Self::Error>,

Chain on a computation for when a value is ready, passing the successful results to the provided closure f.

fn or_else<F, U>(self, f: F) -> OrElse<Self, F, U> where     F: FnMut(Self::Error) -> U,     U: IntoFuture<Item = Self::Item>,

Chain on a computation for when an error happens, passing the erroneous result to the provided closure f.

fn collect(self) -> Collect<Self>

Collect all of the values of this stream into a vector, returning a future representing the result of that computation.

fn concat2(self) -> Concat2<Self> where     Self::Item: Extend<<Self::Item as IntoIterator>::Item>,     Self::Item: IntoIterator,     Self::Item: Default,

Concatenate all results of a stream into a single extendable destination, returning a future representing the end result.

fn concat(self) -> Concat<Self> where     Self::Item: Extend<<Self::Item as IntoIterator>::Item>,     Self::Item: IntoIterator,

Deprecated since 0.1.14

: please use Stream::concat2 instead

Concatenate all results of a stream into a single extendable destination, returning a future representing the end result.

fn fold<F, T, Fut>(self, init: T, f: F) -> Fold<Self, F, Fut, T> where     F: FnMut(T, Self::Item) -> Fut,     Fut: IntoFuture<Item = T>,     Self::Error: From<<Fut as IntoFuture>::Error>,

Execute an accumulating computation over a stream, collecting all the values into one final result.

fn flatten(self) -> Flatten<Self> where     Self::Item: Stream,     <Self::Item as Stream>::Error: From<Self::Error>,

Flattens a stream of streams into just one continuous stream.

fn skip_while<P, R>(self, pred: P) -> SkipWhile<Self, P, R> where     P: FnMut(&Self::Item) -> R,     R: IntoFuture<Item = bool, Error = Self::Error>,

Skip elements on this stream while the predicate provided resolves to true.

fn take_while<P, R>(self, pred: P) -> TakeWhile<Self, P, R> where     P: FnMut(&Self::Item) -> R,     R: IntoFuture<Item = bool, Error = Self::Error>,

Take elements from this stream while the predicate provided resolves to true.

fn for_each<F, U>(self, f: F) -> ForEach<Self, F, U> where     F: FnMut(Self::Item) -> U,     U: IntoFuture<Item = (), Error = Self::Error>,

Runs this stream to completion, executing the provided closure for each element on the stream.

fn from_err<E>(self) -> FromErr<Self, E> where     E: From<Self::Error>,

Map this stream's error to any error implementing From for this stream's Error, returning a new stream.

fn take(self, amt: u64) -> Take<Self>

Creates a new stream of at most amt items of the underlying stream.

fn skip(self, amt: u64) -> Skip<Self>

Creates a new stream which skips amt items of the underlying stream.

fn fuse(self) -> Fuse<Self>

Fuse a stream such that poll will never again be called once it has finished.

fn by_ref(&mut self) -> &mut Self

Borrows a stream, rather than consuming it.

fn catch_unwind(self) -> CatchUnwind<Self> where     Self: UnwindSafe,

Catches unwinding panics while polling the stream.

fn buffered(self, amt: usize) -> Buffered<Self> where     Self::Item: IntoFuture,     <Self::Item as IntoFuture>::Error == Self::Error,

An adaptor for creating a buffered list of pending futures.

fn buffer_unordered(self, amt: usize) -> BufferUnordered<Self> where     Self::Item: IntoFuture,     <Self::Item as IntoFuture>::Error == Self::Error,

An adaptor for creating a buffered list of pending futures (unordered).

fn merge<S>(self, other: S) -> Merge<Self, S> where     S: Stream<Error = Self::Error>,

Deprecated

: functionality provided by select now

An adapter for merging the output of two streams.

fn zip<S>(self, other: S) -> Zip<Self, S> where     S: Stream<Error = Self::Error>,

An adapter for zipping two streams together.

fn chain<S>(self, other: S) -> Chain<Self, S> where     S: Stream<Item = Self::Item, Error = Self::Error>,

Adapter for chaining two stream.

fn peekable(self) -> Peekable<Self>

Creates a new stream which exposes a peek method.

fn chunks(self, capacity: usize) -> Chunks<Self>

An adaptor for chunking up items of the stream inside a vector.

fn select<S>(self, other: S) -> Select<Self, S> where     S: Stream<Item = Self::Item, Error = Self::Error>,

Creates a stream that selects the next element from either this stream or the provided one, whichever is ready first.

fn forward<S>(self, sink: S) -> Forward<Self, S> where     S: Sink<SinkItem = Self::Item>,     Self::Error: From<<S as Sink>::SinkError>,

A future that completes after the given stream has been fully processed into the sink, including flushing.

fn split(self) -> (SplitSink<Self>, SplitStream<Self>) where     Self: Sink,

Splits this Stream + Sink object into separate Stream and Sink objects.

fn inspect<F>(self, f: F) -> Inspect<Self, F> where     F: FnMut(&Self::Item),

Do something with each item of this stream, afterwards passing it on.

fn inspect_err<F>(self, f: F) -> InspectErr<Self, F> where     F: FnMut(&Self::Error),

Do something with the error of this stream, afterwards passing it on.